https://www.amanmachine.com/watch/extrusion-blow-molding-process-video.html https://www.amanmachine.com/assets/img/guides/ebm-process-six-steps.jpg Extrusion blow molding in six steps A narrated film of the extrusion blow molding process in six steps, with drawings of each step cut against real machines: parisons between yellow clamp units, a mould closing, flash on finished bottles, and jerry can and drum machines. English captions. https://www.amanmachine.com/assets/video/guides/ebm-process-six-steps.mp4 176 2026-10-18T00:00:00+08:00 yes https://www.amanmachine.com/watch/injection-blow-molding-machine-am35-video.html https://www.amanmachine.com/assets/img/watch/injection-blow-molding-am35.jpg AM35 injection blow molding machine at work Four white bottles are tipped upright onto a green conveyor at the AM35 out-feed; then the machine from the side, white preforms on the core rods, the mould plates with their hoses, the third station where the bottles come off the rods, and the machine from the front. English narration with captions. https://www.amanmachine.com/assets/video/watch/injection-blow-molding-am35-v2.mp4 112 2026-10-25T00:00:00+08:00 yes https://www.amanmachine.com/watch/two-colour-cap-mould-at-work-video.html https://www.amanmachine.com/assets/img/watch/two-colour-cap-mould-at-work.jpg Two-colour cap mould at work on the press A two-colour cap mould at work on an injection moulding machine: twelve caps on the cores, the mould opening, turning and closing between shots, the mould face up close, caps with green tops leaving on a conveyor, and a finished white-and-green cap held to the camera, outside and inside. English narration with captions. https://www.amanmachine.com/assets/video/watch/two-colour-cap-mould-at-work-v2.mp4 127 2026-10-25T00:00:00+08:00 yes