Extrusion blow molds — HDPE bottle and jerry can blow moulds
Precision blow moulds machined in-house at AMAN - matched to your bottle, jerry can, drum or PET bottle (stretch blow). Single- to multi-cavity, aluminium or hardened steel, with spare inserts. Blow moulds in 25–35 days from approved drawings.
Looking for a mould for your own bottle, jerry can or drum? Start on our blow mould manufacturer page. This page lists our oil and chemical bottle blow moulds.
1L-25L HDPE Lubricant Oil Bottle Blow Mould
- TypeCustom mould / tooling
- MaterialHardened steel / aluminium
PP Detergent Bottle Extrusion Blow Mould
- TypeCustom mould / tooling
- MaterialHardened steel / aluminium
2-10L Lubricant Oil Bottle Extrusion Blow Mould
- TypeCustom mould / tooling
- MaterialHardened steel / aluminium
5L HDPE Jerry Can Extrusion Blow Molding Mould
- TypeCustom mould / tooling
- MaterialHardened steel / aluminium
Daily Chemical Bottle Blow Mould with Handle
- TypeCustom mould / tooling
- MaterialHardened steel / aluminium
2L-10L Daily Chemical Bottle Blow Mould
- TypeCustom mould / tooling
- MaterialHardened steel / aluminium
Tooling a specific container? See the Jerry can blow moulds page, or the die head that feeds this blow mould.
Looking for a blow mould by the bottle?
This page lists the blow tooling itself. If you would rather start from the container you sell — a detergent bottle, a jerry can, a drum, a small IBM bottle or a PET bottle — and see the tool running at tryout, start from the blow mould manufacturer page and it will route you to the right family.
Either way the tooling is the same tooling, cut in AMAN's own workshop and tried out on a machine before it is packed. Parts that are injection moulded rather than blown (caps, jars, measuring cups and PET preforms) are on the injection mould page.
Send us your bottle or cap drawing
One upload is enough to start. You can attach the drawing straight to the enquiry form, with no email back and forth first.
- ✓A drawing, a 3D file, or clear photos of every side of the sample
- ✓Length, width, height and weight of the finished part
- ✓Material, and the neck finish if it is a bottle, jar or closure
- ✓How many cavities, or the machine tonnage, or the parts per hour you need