1L Bottle Blow Molding Machine, Single/Double Station

Name: 1L Bottle Blow Molding Machine, Single/Double Station
Brand: AMAN

Overview

This machine blows liquid container bottles around the 1L size and accepts plastic recycling feedstock, so processors can convert reground HDPE into usable containers while keeping walls even. Pick double station to blow one bottle while the next loads and roughly double throughput, or single station for smaller runs, with in-line deflashing finishing each bottle automatically. AMAN matches the bottle mould and configures the line around your output target.

Key features

Single or double station to match output
Runs recycled and virgin HDPE feedstock
Servo-hydraulic wall control on 1L bottles
In-line automatic deflashing finishes each bottle

Application

1L liquid containers and bottles in recycled or virgin HDPE for water, detergent and household-liquid filling lines.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration.Send your drawing Ask on WhatsApp

Technical parameters

Single Station or Double Station Automatic Liquid Container Bottle 1L Blowing Molding Machine

Parameter	Unit	AMB-D-2L (Double Station)
Max product capacity	L	2
Suitable material		HDPE
Screw diameter	mm	60
Extrusion output	kg/h	55
Oil pump motor power	kW	11
Platen size	mm	368 x 430
Machine floor space	mm	3100 x 2200 x 2500

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

We also make the blow mould for your bottle in our own workshop and try it out on a machine before it ships. Blow moulds take 25–35 days from approved drawings.

Each machine is configured to your container; the final specification is written into your quotation.

See each step of the extrusion blow molding process, and which machine range fits your container size.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

1L liquid containers and bottles in recycled or virgin HDPE for water, detergent and household-liquid filling lines. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

HDPE / PP is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Lead time is confirmed in our quotation according to configuration.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.