Footage: Medicine bottle production - injection blow molding machine. Want to see it running a container like yours? Ask us for a video.
50ml Medicine Bottle Injection Blow Molding Machine
A servo-motor injection blow molding machine for 50ml HDPE medicine bottles, forming seamless, flash-free pharmaceutical containers in one step. The inject-blow rotary stations build preform and bottle without an intermediate handling step.
Overview
This machine injects a preform and blows it on a rotating station group so the container emerges seamless and without flash, a finish that suits medicine bottles and chemical packaging where leak-tight necks matter. Servo-motor drive holds shot and clamp control steady from 50ml medicine bottles up to 1L containers while lowering energy draw, and it runs HDPE, PP and PE. AMAN supplies the precision inject-blow tooling and complete line support.
Key features
- Servo motor steadies the 50ml-1L cycle
- One-step inject-blow yields seamless, flash-free bottles
- Leak-tight necks for chemical and industrial packaging
- Runs HDPE, PP and PE materials
Application
Seamless 50ml-1L HDPE, PP and PE medicine bottles and small containers for pharmaceutical, chemical and household packaging filling lines.
Send your bottle drawing or a physical sample — AMAN cuts the matching mould in its own workshop and quotes the machine, mould and line in one quotation. Request a quote →
Service and support
AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.
Injection Blow Molding for Pharma Eye-Drop & Dropper Bottles — 10–30 ml HDPE/PP Medicine Bottles, Bangladesh
Eye-drop, dropper and 10–30 ml medicine bottles leave no room for flash or a sloppy neck. A pharma-packaging maker turned to AMAN's 3-station injection blow molding for precise, seam-free necks with no flash to trim.
Read the case study →Technical parameters
| Parameter | Unit | AM 35 |
|---|---|---|
| Max injection weight (HDPE) | g | 140 |
| Theoretical shot volume | cm3 | 200 |
| Clamping force, injection mould | kN | 300 |
| Clamping force, blowing mould | kN | 55 |
| Screw diameter | mm | 40 |
| Screw L/D ratio | 22 | |
| Dry cycle time | s | 4 |
| Max mould size (L x W) | mm | 400 x 250 |
| Mould thickness | mm | 180 |
| Mould opening stroke | mm | 120 |
| Main motor power | kW | 15 |
| Barrel heating power | kW | 6.5 |
| Machine size (L x W x H) | m | 3.2 x 1.4 x 2.2 |
| Machine weight | ton | 4 |
One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.
We also make injection blow (IBM) moulds in our own workshop. Trial bottles are moulded on our own machine and ship with the tool. Injection blow moulds take 25–35 days from approved drawings.
Each machine is configured to your container; the final specification is written into your quotation.
See the full range, from 2 ml vials to 1-litre bottles, on our injection blow molding machine page.
Detailed photos
Request a quote for this machine
Tell us your container or part, material and target output, and attach a drawing if you have one.
FAQ
Related machines
