PP PE Bucket Pail and Basin Injection Molding Machine

Name: PP PE Bucket Pail and Basin Injection Molding Machine
Brand: AMAN

Overview

Paint pails and basins are wide, thin-walled parts that must stay round and carry a tight-fitting lid, so even fill and rim accuracy are essential. This machine molds PP buckets and basins with a hot-runner tool that balances flow across the large surface to avoid warp and short shots. The hot runner cuts scrap on these big shots. The lid mould is made alongside the pail mould.

Key features

Molds PP paint pails, buckets and basins
Hot-runner tool balances fill on wide parts
Accurate rims for tight-fitting snap lids

Application

PP and PE paint buckets, water pails and basins with lids for paint, coatings, household and industrial packaging.

Send your part drawing or a physical sample — AMAN cuts the matching mould in its own workshop and quotes the machine, mould and line in one quotation. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Send your part drawing or a physical sample — AMAN cuts the matching mould in its own workshop and quotes the machine, mould and line in one quotation.Send your drawing Ask on WhatsApp

Recommended setup

We make the complete 20 L pail mould set — body, lid and handle — in our own workshop, and also supply the matched injection machines to run it. Recommended setup:

20 L pail body mould
Parameter	Value
Reference part	20 L pail, approx. 1.6 kg
Cavities	1
Runner	Open hot runner
Cooling	Beryllium-copper inserts for faster cooling
Mould steel	Pre-hardened mould steel
Cycle time	35–50 s (depends on part design)
Mould size (L × W × H)	700 × 700 × 750 mm
Mould delivery	40–60 days
Matched machine	AM-700 (700 t class)
Clamping force	7,000 kN
Space between tie bars	970 × 930 mm
Mould height (min–max)	350–960 mm
Opening stroke	970 mm
Screw diameter	95 mm
Shot weight (PS)	2,903 g

20 L pail lid mould
Parameter	Value
Cavities	1
Runner	Open hot runner
Cycle time	25–35 s (depends on part design)
Mould size (L × W × H)	520 × 520 × 450 mm
Mould delivery	40–60 days
Matched machine	AM-268 (200–320 t class)
Clamping force	2,680 kN
Space between tie bars	580 × 580 mm
Mould height (min–max)	220–600 mm
Opening stroke	560 mm
Screw diameter	53 or 60 mm, chosen by lid weight
Shot weight (PS)	602–772 g

20 L pail handle mould
Parameter	Value
Cavities	4
Runner	Cold runner
Cycle time	15–25 s (depends on part design)
Mould delivery	40–60 days
Matched machine	200–320 t class
Screw	Chrome-plated screw for PE

Shot weight is the machine rating in PS.

Basin moulds are sized to your drawing; send it and we confirm the machine.

Other machine sizes

Parameter	Unit	AMAN injection moulding series
Clamping force	kN	1,200 - 10,000
Clamping force	ton	120 - 1,000
Number of models in series	pcs	11
Screw diameter	mm	36 - 120
Screw L/D ratio		23.3 - 24.7
Theoretical shot volume	cm3	163 - 5,878
Injection stroke	mm	160 - 520
Platen size	mm	610 x 610 - 1,310 x 1,310
Machine size (L x W x H)	m	4.7-11.1 x 1.3-2.8 x 1.9-3.0
Pump motor	kW	14 - 62
Max. hydraulic pressure	MPa	17.5
Oil tank capacity	L	200 - 1,400
Model selection		Matched to your part weight, projected area and cavity count

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

Order the injection mould for your part with this machine and we make it in our own workshop, then ship machine and mould as one set, tested and tuned together. Send your part drawing and we quote the machine together with the mould.

Each machine is configured to your container; the final specification is written into your quotation.

Detailed photos

Large plastic bucket with side lugs on the mould core

Finished large plastic bucket with side lugs

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

PP and PE paint buckets, water pails and basins with lids for paint, coatings, household and industrial packaging. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

PP is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Injection mould delivery time is 40–60 days. Machine delivery time is confirmed in your quotation.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.