Rescue Ring Accumulator Head Blow Molding Machine

Name: Rescue Ring Accumulator Head Blow Molding Machine
Brand: AMAN

Overview

A rescue ring is a large, thick-walled hollow part, and an accumulator die head is the reason this machine can make it: the head stores melt and releases it in one fast burst to form a heavy parison without sag. The fixed-station layout suits these big single parts, holding the mould steady through the blow. Energy-saving servo-hydraulic drive controls wall thickness over the ring, and automatic in-line deflashing trims the pinch-off. AMAN supplies the matching large-part mould.

Key features

Accumulator die head forms large heavy-wall parts
Fixed station suits bulky single rescue rings
Servo-hydraulic drive controls thickness over the ring
Runs PP and HDPE for buoyant rescue tubes

Application

Life buoys, rescue rings and large hollow tubes in PP and HDPE for marine safety and water-rescue equipment.

Send your bottle drawing or a physical sample — AMAN cuts the matching mould in its own workshop and quotes the machine, mould and line in one quotation. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Send your bottle drawing or a physical sample — AMAN cuts the matching mould in its own workshop and quotes the machine, mould and line in one quotation.Send your drawing Ask on WhatsApp

Technical parameters

Parameter	Unit	AMB-100L-A
Max. product volume	L	100
Min. product volume	L	30
Screw diameter	mm	100
Screw L/D ratio		30
Extrusion output	kg/hr	220
Clamping force	kN	350
Max. mould size	mm	900 x 1100
Mould opening stroke	mm	550 - 1400
Machine size (L x W x H)	mm	6200 x 3600 x 4800
Machine weight	ton	15.8

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

Each machine is configured to your container; the final specification is written into your quotation.

See each step of the extrusion blow molding process, and which machine range fits your container size.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

Life buoys, rescue rings and large hollow tubes in PP and HDPE for marine safety and water-rescue equipment. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

HDPE is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Lead time is confirmed in our quotation according to configuration.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.