500ml-1L HDPE Detergent Bottle Blow Molding Machine

Name: 500ml-1L HDPE Detergent Bottle Blow Molding Machine
Brand: AMAN

Overview

Detergent bottles in the 500ml-1L size sell in high volumes and need a square, stable body with an even wall, so the servo-hydraulic drive holds wall-thickness control steady to keep each bottle straight-walled and consistent. Fully-automatic operation runs the cycle hands-off, and in-line deflashing delivers trimmed bottles straight toward filling. Single or double station can be specified to lift throughput, and AMAN supplies the matching mould and neck tooling.

Key features

Even-walled HDPE bottles from 100ml to 2L
Servo wall-thickness control for consistent bodies
Fully-automatic cycle with in-line deflashing
Single or double station for higher output

Application

500ml-1L HDPE detergent, liquid-soap and household-cleaner bottles for automated filling and packaging lines.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration.Send your drawing Ask on WhatsApp

Technical parameters

Plastic Automatic Liquid Container Detergent Bottles 500ML 1L Bottle Making Blowing Molding Machine

Parameters shown are for the single-station model; a double-station version is available; ask for its datasheet.

Parameter	Unit	AMB-2L (Single Station)
Max product capacity	L	2
Suitable material		HDPE
Screw diameter	mm	50
Extrusion output	kg/h	30
Oil pump motor power	kW	11
Platen size	mm	368 x 450
Machine floor space	mm	3100 x 2200 x 2500

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

We also make detergent bottle blow moulds in our own workshop, handled bottles included, and each one is tried out on a machine before it ships. Blow moulds take 25–35 days from approved drawings.

Each machine is configured to your container; the final specification is written into your quotation.

See each step of the extrusion blow molding process, and which machine range fits your container size.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

500ml-1L HDPE detergent, liquid-soap and household-cleaner bottles for automated filling and packaging lines. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

HDPE / PP is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Lead time is confirmed in our quotation according to configuration.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.