3D Auto Air Intake Hose Blow Molding Machine

Name: 3D Auto Air Intake Hose Blow Molding Machine
Brand: AMAN

Overview

Auto air-intake hoses follow curved, three-dimensional paths that conventional 2D blowing cannot form cleanly. This 3D machine lays the parison along the part's route before blowing, so bends and varying cross-sections come out with little pinch waste and accurate geometry. It processes engineering resins from PE and PP to ABS, PA and TPV for under-hood durability and heat resistance, with load-sensing servo-hydraulic drive for consistent wall control. AMAN provides the matching 3D mould and automatic deflashing.

Key features

3D blowing forms curved air-intake hoses cleanly
Runs PE, PP, ABS, PA and TPV resins
Parison laid along part path for minimal flash
Servo-hydraulic drive controls wall on complex shapes

Application

Automotive air-intake hoses, ducts and under-hood spare parts in PE, PP, ABS, PA and TPV for vehicle and accessory makers.

Equipment like this is already running in 100+ countries — AMAN installs, commissions and trains your crew on site. Ask how delivery works for your market. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Equipment like this is already running in 100+ countries — AMAN installs, commissions and trains your crew on site. Ask how delivery works for your market.Send your drawing Ask on WhatsApp

Technical parameters

Parameters shown are for the single-station model; a double-station version is available; ask for its datasheet.

Parameter	Unit	AMB-10L (Single Station)
Max product capacity	L	10
Suitable material		HDPE
Screw diameter	mm	70
Extrusion output	kg/h	80
Oil pump motor power	kW	15
Mould opening stroke	mm	250 - 650
Platen size	mm	430 x 500
Machine floor space	mm	4100 x 2700 x 2800

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

Each machine is configured to your container; the final specification is written into your quotation.

See each step of the extrusion blow molding process, and which machine range fits your container size.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

Automotive air-intake hoses, ducts and under-hood spare parts in PE, PP, ABS, PA and TPV for vehicle and accessory makers. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

PP is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Lead time is confirmed in our quotation according to configuration.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.