Footage: 250 ml pesticide bottle production - injection blow molding machine. Want to see it running a container like yours? Ask us for a video.
100ml-1L One-Step Injection Blow Molding Machine
An IBM injection blow molding machine using a one-step inject-and-blow cycle for precision industrial bottles in the 100 ml to 1,000 ml range. Rotary inject and blow stations deliver seamless, flash-free containers in HDPE, PP or PE.
Overview
Injection blow molding moulds the preform first, so the neck and wall are formed to tight tolerances before the bottle is blown on the same machine, with no transfer and no parting-line flash. That precision suits industrial packaging where consistent shot weight and a clean sealing surface matter. The rotary station arrangement keeps inject, blow and eject running in sequence for steady throughput, and the process runs HDPE, PP and PE across the 100 ml to 1,000 ml range without secondary trimming.
Key features
- One-step IBM cycle, no transfer between stations
- Precision neck and wall, seamless and flash-free
- Rotary inject and blow stations for steady output
- Handles HDPE, PP and PE from 100 ml to 1,000 ml
Application
Seamless, precision 100 ml to 1,000 ml bottles in HDPE, PP or PE for industrial, chemical and packaging applications.
Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration. Request a quote →
Service and support
AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.
Technical parameters
| Parameter | Unit | AM 60 |
|---|---|---|
| Max injection weight (HDPE) | g | 235 |
| Theoretical shot volume | cm3 | 340 |
| Clamping force, injection mould | kN | 600 |
| Clamping force, blowing mould | kN | 90 |
| Screw diameter | mm | 50 |
| Screw L/D ratio | 24 | |
| Dry cycle time | s | 5 |
| Max mould size (L x W) | mm | 740 x 390 |
| Mould thickness | mm | 280 |
| Mould opening stroke | mm | 140 |
| Main motor power | kW | 30 |
| Barrel heating power | kW | 12 |
| Machine size (L x W x H) | m | 4.0 x 1.7 x 2.5 |
| Machine weight | ton | 8 |
One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.
We also make injection blow (IBM) moulds in our own workshop. Trial bottles are moulded on our own machine and ship with the tool. Injection blow moulds take 25–35 days from approved drawings.
Each machine is configured to your container; the final specification is written into your quotation.
See the full range, from 2 ml vials to 1-litre bottles, on our injection blow molding machine page.
Request a quote for this machine
Tell us your container or part, material and target output, and attach a drawing if you have one.
FAQ
Related machines
