HDPE Vegetable Fruit Crate Injection Molding Machine

Name: HDPE Vegetable Fruit Crate Injection Molding Machine
Brand: AMAN

Overview

Produce crates, baskets and buckets need stiff, ribbed walls that release cleanly, and injection molding gives the precise fill and consistent shrinkage those geometries demand. The hot-runner mould (single-cavity for large pails, multi-cavity for smaller parts) keeps cycles short and trims runner waste. One machine covers crates, boxes, baskets and buckets simply by changing the tool, making it flexible for agricultural and logistics packaging.

Key features

Moulds crates, baskets, boxes and buckets
Hot-runner tool for short cycles
Stiff, stackable ribbed HDPE containers

Application

HDPE vegetable and fruit crates, boxes, baskets and buckets for farming, logistics and retail handling.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration.Send your drawing Ask on WhatsApp

Recommended setup

We make the crate and bucket moulds in our own workshop and also supply the matched injection machine to run them. The basket mould and the 20 L pail mould both run on one AM-700 — you change the mould, not the machine. Recommended setup:

Fruit / vegetable basket mould
Parameter	Value
Cavities	1
Runner	5-point open hot runner
Cycle time	40–55 s (depends on part design)
Mould size (L × W × H)	800 × 550 × 650 mm
Mould delivery	40–60 days
Matched machine	AM-700 (600–700 t class)
Clamping force	7,000 kN
Space between tie bars	970 × 930 mm
Mould height (min–max)	350–960 mm
Opening stroke	970 mm
Screw diameter	95 mm
Shot weight (PS)	2,903 g

20 L pail body mould
Parameter	Value
Reference part	20 L pail, approx. 1.6 kg
Cavities	1
Runner	Open hot runner
Cooling	Beryllium-copper inserts for faster cooling
Mould steel	Pre-hardened mould steel
Cycle time	35–50 s (depends on part design)
Mould size (L × W × H)	700 × 700 × 750 mm
Mould delivery	40–60 days
Matched machine	AM-700 (700 t class)
Clamping force	7,000 kN
Space between tie bars	970 × 930 mm
Mould height (min–max)	350–960 mm
Opening stroke	970 mm
Screw diameter	95 mm
Shot weight (PS)	2,903 g

Shot weight is the machine rating in PS.

Other machine sizes

Parameter	Unit	AMAN injection moulding series
Clamping force	kN	1,200 - 10,000
Clamping force	ton	120 - 1,000
Number of models in series	pcs	11
Screw diameter	mm	36 - 120
Screw L/D ratio		23.3 - 24.7
Theoretical shot volume	cm3	163 - 5,878
Injection stroke	mm	160 - 520
Platen size	mm	610 x 610 - 1,310 x 1,310
Machine size (L x W x H)	m	4.7-11.1 x 1.3-2.8 x 1.9-3.0
Pump motor	kW	14 - 62
Max. hydraulic pressure	MPa	17.5
Oil tank capacity	L	200 - 1,400
Model selection		Matched to your part weight, projected area and cavity count

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

Order the injection mould for your part with this machine and we make it in our own workshop, then ship machine and mould as one set, tested and tuned together. Send your part drawing and we quote the machine together with the mould.

Each machine is configured to your container; the final specification is written into your quotation.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

HDPE vegetable and fruit crates, boxes, baskets and buckets for farming, logistics and retail handling. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

HDPE / PP is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Injection mould delivery time is 40–60 days. Machine delivery time is confirmed in your quotation.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.