PP Toilet Seat Injection Molding Machine
A PP toilet seat and cover injection mould, made in AMAN's own workshop, with the matched injection machine to run it. PP is the thermoplastic most plastic toilet seats are injection moulded in: it stands up to daily use and can be recycled.
Overview
The standard mould is a 1 + 1 family mould — one cover and one seat ring per shot — on an AM-700 (7,000 kN), with a cycle of about 55–70 s depending on part design. For more sets per machine, a 2 + 2 family mould runs on an AM-1080 (1,080 t class). AMAN supplies the matching seat mould and sets up the complete line. Injection mould delivery time is 40–60 days.
Key features
- 1 + 1 family mould, cover and seat ring per shot
- 2 + 2 mould on an AM-1080 for higher output
- PP for durable, recyclable seats
- Mould made in our own workshop
Application
Injection-moulded PP toilet seats and covers for bathroom fixture and sanitary-ware producers.
Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration. Request a quote →
Service and support
AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.
Recommended setup
We make the toilet seat mould in our own workshop and also supply the matched injection machine to run it. Recommended setup:
| Parameter | Value |
|---|---|
| Material | PP |
| Cavities | 1 cover + 1 seat ring per shot (family mould) |
| Cycle time | 55–70 s (depends on part design) |
| Mould delivery | 40–60 days |
| Matched machine | AM-700 (700 t class) |
| Clamping force | 7,000 kN |
| Space between tie bars | 970 × 930 mm |
| Mould height (min–max) | 350–960 mm |
| Opening stroke | 970 mm |
| Screw diameter | 95 mm |
| Shot weight (PS) | 2,903 g |
| Seat-ring-only mould | 300–400 t class machine |
| Cover-only mould | 450–550 t class machine |
| Higher output | 2 + 2 family mould on an AM-1080 (1,080 t class) |
Shot weight is the machine rating in PS.
Other machine sizes
| Parameter | Unit | AMAN injection moulding series |
|---|---|---|
| Clamping force | kN | 1,200 - 10,000 |
| Clamping force | ton | 120 - 1,000 |
| Number of models in series | pcs | 11 |
| Screw diameter | mm | 36 - 120 |
| Screw L/D ratio | 23.3 - 24.7 | |
| Theoretical shot volume | cm3 | 163 - 5,878 |
| Injection stroke | mm | 160 - 520 |
| Platen size | mm | 610 x 610 - 1,310 x 1,310 |
| Machine size (L x W x H) | m | 4.7-11.1 x 1.3-2.8 x 1.9-3.0 |
| Pump motor | kW | 14 - 62 |
| Max. hydraulic pressure | MPa | 17.5 |
| Oil tank capacity | L | 200 - 1,400 |
| Model selection | Matched to your part weight, projected area and cavity count |
One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.
Order the injection mould for your part with this machine and we make it in our own workshop, then ship machine and mould as one set, tested and tuned together. Send your part drawing and we quote the machine together with the mould.
Each machine is configured to your container; the final specification is written into your quotation.
Detailed photos
Request a quote for this machine
Tell us your container or part, material and target output, and attach a drawing if you have one.
FAQ
Related machines
328 Ton 3100g PET Preform Injection Molding Machine
- ApplicationIndustrial Packaging
- ProcessInjection molding
48-Cavity PET Preform Machine, 2300g Electric
- ApplicationFood & Beverage
- ProcessInjection molding