HDPE Oil Pull-Cap Servo Injection Molding Machine
A servo-type injection molding machine for HDPE oil pull-caps, supplied complete with the mould. The servo drive delivers fast, repeatable cycles so the pull-tab and pour spout form cleanly on every closure.
Overview
Pull-caps for oil containers need a clean tamper-tab and a tight sealing face, which depends on precise, repeatable injection. This machine pairs a servo-electric drive with a hot-runner multi-cavity mould to fill many caps per shot at high productivity while holding dimensions steady. Servo control trims energy use during clamping and injection and keeps each closure consistent through long runs.
Key features
- Supplied with the matching HDPE pull-cap mould
- Servo drive cuts energy and steadies cycles
- Hot-runner multi-cavity tool for high cap output
- Clean tamper-tab and tight sealing face
Application
HDPE pull-caps and pour spouts for lubricant, motor and edible oil containers in industrial packaging lines.
Equipment like this is already running in 100+ countries — AMAN installs, commissions and trains your crew on site. Ask how delivery works for your market. Request a quote →
Service and support
AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.
Watch it run
Watch the machine run
Footage: AMAN injection mould producing plastic oil-jug pull-caps. Want to see it running a container like yours? Ask us for a video.
Technical parameters
| Parameter | Unit | AMAN injection moulding series |
|---|---|---|
| Clamping force | kN | 1,200 - 10,000 |
| Clamping force | ton | 120 - 1,000 |
| Number of models in series | pcs | 11 |
| Screw diameter | mm | 36 - 120 |
| Screw L/D ratio | 23.3 - 24.7 | |
| Theoretical shot volume | cm3 | 163 - 5,878 |
| Injection stroke | mm | 160 - 520 |
| Platen size | mm | 610 x 610 - 1,310 x 1,310 |
| Machine size (L x W x H) | m | 4.7-11.1 x 1.3-2.8 x 1.9-3.0 |
| Pump motor | kW | 14 - 62 |
| Max. hydraulic pressure | MPa | 17.5 |
| Oil tank capacity | L | 200 - 1,400 |
| Model selection | Matched to your part weight, projected area and cavity count |
One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.
Order the cap mould with this machine and we make it in our own workshop, then ship machine and mould as one set, tested and tuned together. The mould itself takes 40–60 days from approved drawings. Send your part drawing and we quote the machine together with the mould.
Each machine is configured to your container; the final specification is written into your quotation.
Request a quote for this machine
Tell us your container or part, material and target output, and attach a drawing if you have one.
FAQ
Related machines
16 Cavity PCO 1880-1881 Cap Injection Molding Machine
- ApplicationFood & Beverage
- ProcessInjection molding
Cosmetic Flip Top Cap Injection Molding Machine
- ApplicationCosmetic
- ProcessInjection molding
Automatic Water Bottle Cap Injection Molding Machine
- ApplicationFood & Beverage
- ProcessInjection molding
HDPE Pull Ring Bottle Cap Injection Molding Machine
- ApplicationFood & Beverage
- ProcessInjection molding
Combination Cover Cap Injection Molding Machine
- ApplicationIndustrial Packaging
- ProcessInjection molding
100ml Cosmetic Flip-Cap Injection Molding Machine
- ApplicationCosmetic
- ProcessInjection molding