High Speed Baby Bottle Injection Blow Molding
A one-step injection blow molding machine for small baby feeding and milk bottles. Inject-and-blow forming yields seamless, flash-free containers with smooth interiors suited to infant feeding.
Overview
Small milk and feeding bottles demand a hygienic, seam-free body and a precise neck for teats, which one-step injection blow molding provides in a single cycle. The machine injects a preform and blows it on the same rotary tool, so the finished bottle has no flash to trim and no inner seam where milk residue could lodge. Running food-grade PP for feeding bottles, and HDPE and LDPE for small milk bottles, it is built for steady small-bottle output. AMAN supplies the matching mould and tooling.
Key features
- Small seamless feeding and milk bottles
- Inject-and-blow rotary, no flash or seam
- Food-grade PP for feeding bottles
- Smooth interior and accurate teat neck
Application
Small baby feeding and milk bottles for infant care and food beverage producers.
Equipment like this is already running in 100+ countries — AMAN installs, commissions and trains your crew on site. Ask how delivery works for your market. Request a quote →
Service and support
AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.
Technical parameters
| Parameter | Unit | AM 60 |
|---|---|---|
| Max injection weight (HDPE) | g | 235 |
| Theoretical shot volume | cm3 | 340 |
| Clamping force, injection mould | kN | 600 |
| Clamping force, blowing mould | kN | 90 |
| Screw diameter | mm | 50 |
| Screw L/D ratio | 24 | |
| Dry cycle time | s | 5 |
| Max mould size (L x W) | mm | 740 x 390 |
| Mould thickness | mm | 280 |
| Mould opening stroke | mm | 140 |
| Main motor power | kW | 30 |
| Barrel heating power | kW | 12 |
| Machine size (L x W x H) | m | 4.0 x 1.7 x 2.5 |
| Machine weight | ton | 8 |
One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.
We also make injection blow (IBM) moulds in our own workshop. Trial bottles are moulded on our own machine and ship with the tool. Injection blow moulds take 25–35 days from approved drawings.
Each machine is configured to your container; the final specification is written into your quotation.
See the full range, from 2 ml vials to 1-litre bottles, on our injection blow molding machine page.
Request a quote for this machine
Tell us your container or part, material and target output, and attach a drawing if you have one.
FAQ
Related machines
