PET Agrochemical Preform Injection Molding Machine

Name: PET Agrochemical Preform Injection Molding Machine
Brand: AMAN

Overview

Rather than blowing bottles, this machine injection-moulds PET preforms in volume for the agrochemical sector. A hot-runner multi-cavity mould fills many preforms per cycle with balanced flow and no cold-runner scrap, while the servo or electric drive keeps shot weight and energy use tight across long runs. Consistent preform weight and neck finish are what later give the blown pesticide bottle reliable strength and sealing. AMAN supplies the matching hot-runner mould and supporting line.

Key features

Injection-moulds PET preforms, not finished bottles
Hot-runner multi-cavity mould, no runner scrap
Servo or electric drive for tight shot control
Consistent preform weight and neck finish

Application

PET preforms for agrochemical and pesticide bottles, fed to downstream stretch-blow lines.

Send your part drawing or a physical sample — AMAN cuts the matching mould in its own workshop and quotes the machine, mould and line in one quotation. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Send your part drawing or a physical sample — AMAN cuts the matching mould in its own workshop and quotes the machine, mould and line in one quotation.Send your drawing Ask on WhatsApp

Technical parameters

High Performance PET Bottle Preform Injection Molding Machine For Agrochemical Preforms

Parameter	Unit	AMAN injection moulding series
Clamping force	kN	1,200 - 10,000
Clamping force	ton	120 - 1,000
Number of models in series	pcs	11
Screw diameter	mm	36 - 120
Screw L/D ratio		23.3 - 24.7
Theoretical shot volume	cm3	163 - 5,878
Injection stroke	mm	160 - 520
Platen size	mm	610 x 610 - 1,310 x 1,310
Machine size (L x W x H)	m	4.7-11.1 x 1.3-2.8 x 1.9-3.0
Pump motor	kW	14 - 62
Max. hydraulic pressure	MPa	17.5
Oil tank capacity	L	200 - 1,400
Model selection		Matched to your part weight, projected area and cavity count

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

Order the PET preform mould with this machine and we make it in our own workshop, then ship machine and mould as one set, tested and tuned together. The mould itself takes 40–60 days from approved drawings. Send your part drawing and we quote the machine together with the mould.

Each machine is configured to your container; the final specification is written into your quotation.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

PET preforms for agrochemical and pesticide bottles, fed to downstream stretch-blow lines. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

PET is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Lead time is confirmed in our quotation according to configuration.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.