10L HDPE Garden Spray Kettle Blow Molding Machine

Name: 10L HDPE Garden Spray Kettle Blow Molding Machine
Brand: AMAN

Overview

A garden sprayer tank combines a wide body and a moulded handle, which this machine blows in a single shot so the container comes off complete. Fully automatic operation runs the 10L kettle through blowing and in-line deflashing without manual handling, and energy-saving servo-hydraulic drive holds wall thickness so the tank withstands pump pressure. Single- or double-station setups match production volume, and AMAN provides the matching mould and turnkey line.

Key features

Blows 10L tank with integral handle
Fully automatic from blow to deflash
Even walls to take pump pressure
Single or double station by volume

Application

HDPE garden spray-kettle tanks and similar handled containers up to 10L for agricultural and household sprayers.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration.Send your drawing Ask on WhatsApp

Technical parameters

Full Automatic 10 Liter Garden Spray Kettle Container Extrusion Blow Molding Making Machine

Parameters shown are for the single-station model; a double-station version is available; ask for its datasheet.

Parameter	Unit	AMB-10L (Single Station)
Max product capacity	L	10
Suitable material		HDPE
Screw diameter	mm	70
Extrusion output	kg/h	80
Oil pump motor power	kW	15
Mould opening stroke	mm	250 - 650
Platen size	mm	430 x 500
Machine floor space	mm	4100 x 2700 x 2800

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

We also make the blow mould for your bottle in our own workshop and try it out on a machine before it ships. Blow moulds take 25–35 days from approved drawings.

Each machine is configured to your container; the final specification is written into your quotation.

See each step of the extrusion blow molding process, and which machine range fits your container size.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

HDPE garden spray-kettle tanks and similar handled containers up to 10L for agricultural and household sprayers. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

HDPE / PP is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Lead time is confirmed in our quotation according to configuration.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.