Bear Honey Bottle Stretch Blow Molding Machine

Name: Bear Honey Bottle Stretch Blow Molding Machine
Brand: AMAN

Shot volume480 cm3Injection clamping685 kNScrew diameter60 mmStations4 (inject / condition / stretch-blow / eject)MaterialsPET / PETG / PCTG / Tritan

A one-step injection stretch blow molding machine for novelty bear-shaped honey bottles, 100ml to 2L. Injecting and blowing on one rotary unit gives seamless, flash-free bottles with crisp detail.

ModelISB-125

BrandAMAN

HS code8477.30

Warranty2 yrs mechanical / 1 yr electrical

Overview

A bear honey bottle needs sharp moulded detail and a seamless body, which one-step injection stretch blow molding delivers by forming the preform and blowing it on the same rotary machine without a parting flash. Running PET across the 100ml to 2L range, the inject-then-blow stations hand the hot preform straight to the blow mould, so there is no reheat and no trimming. The result is a clean, detailed honey bottle ready to fill, with matching moulds from AMAN.

Key features

One-step inject-and-blow on rotary stations
Seamless, flash-free bear honey bottles
Crisp moulded detail with no trimming
Runs PET, 100ml-2L

Application

Novelty and shaped bottles such as bear honey bottles, 100ml to 2L, in PET for food and beverage.

Ask for the full datasheet and a video of this machine running a part like yours. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Ask for the full datasheet and a video of this machine running a part like yours.Send your drawing Ask on WhatsApp

Technical parameters

Small Bear Honey Bottle Machine Injection Stretch Blow Molding Machine

Parameter	Unit	ISB-125
Theoretical shot volume	cm3	480
Screw diameter	mm	60
Clamping force, injection / blowing	kN	685 / 286
Screw L/D ratio		24
Driving power (rated)	kW	65 (380 V)
Heater power (rated)	kW	12.5 (220 V)
Stations		4 (injection / heating pre-blow / stretch blow / take out)
Suitable materials		PET, PETG, PETE, high-transparent PP, PCTG, SAN, PC, PMMA, PS, Tritan (BPA-free)
Machine size (L x W x H)	mm	5000 x 2050 x 3000
Machine weight	ton	11.6

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

Each machine is configured to your container; the final specification is written into your quotation.

See the full range on our injection stretch blow molding machine page.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

Novelty and shaped bottles such as bear honey bottles, 100ml to 2L, in PET for food and beverage. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

HDPE / PP is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Lead time is confirmed in our quotation according to configuration.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.