16 Cavity PCO 1880-1881 Cap Injection Molding Machine
A CE-standard injection molding machine with a 16-cavity mould for PCO 1880 and 1881 HDPE beverage caps. Sixteen cavities produce a full set of standard-neck water and juice closures every cycle.
Overview
This machine injects threaded caps to the PCO 1880 and 1881 standards used across the bottled-water and juice industry, so closures fit common preform necks straight away. The 16-cavity hot-runner mould delivers sixteen caps per shot with no runner scrap, and the servo or electric drive holds the fast, precise cycles cap molding demands for consistent thread and seal. Built to CE standard for export, it pairs with AMAN cap moulds matched to your closure design. High productivity keeps a beverage line supplied with caps.
Key features
- 16-cavity mould for PCO 1880 and 1881 caps
- Hot-runner, sixteen closures per shot
- Servo or electric drive for precise cap cycles
- CE-standard build for export beverage lines
Application
PCO 1880 and 1881 threaded caps for water, juice and beverage bottles produced on high-volume closure lines.
Equipment like this is already running in 100+ countries — AMAN installs, commissions and trains your crew on site. Ask how delivery works for your market. Request a quote →
Service and support
AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.
Watch it run
Watch the machine run
Footage: Screw cap production - injection molding machine. Want to see it running a container like yours? Ask us for a video.
Technical parameters
| Parameter | Unit | AMAN injection moulding series |
|---|---|---|
| Clamping force | kN | 1,200 - 10,000 |
| Clamping force | ton | 120 - 1,000 |
| Number of models in series | pcs | 11 |
| Screw diameter | mm | 36 - 120 |
| Screw L/D ratio | 23.3 - 24.7 | |
| Theoretical shot volume | cm3 | 163 - 5,878 |
| Injection stroke | mm | 160 - 520 |
| Platen size | mm | 610 x 610 - 1,310 x 1,310 |
| Machine size (L x W x H) | m | 4.7-11.1 x 1.3-2.8 x 1.9-3.0 |
| Pump motor | kW | 14 - 62 |
| Max. hydraulic pressure | MPa | 17.5 |
| Oil tank capacity | L | 200 - 1,400 |
| Model selection | Matched to your part weight, projected area and cavity count |
One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.
Order the cap mould with this machine and we make it in our own workshop, then ship machine and mould as one set, tested and tuned together. The mould itself takes 40–60 days from approved drawings. Send your part drawing and we quote the machine together with the mould.
Each machine is configured to your container; the final specification is written into your quotation.
Request a quote for this machine
Tell us your container or part, material and target output, and attach a drawing if you have one.
FAQ
Related machines
Cosmetic Flip Top Cap Injection Molding Machine
- ApplicationCosmetic
- ProcessInjection molding
Automatic Water Bottle Cap Injection Molding Machine
- ApplicationFood & Beverage
- ProcessInjection molding
HDPE Pull Ring Bottle Cap Injection Molding Machine
- ApplicationFood & Beverage
- ProcessInjection molding
Combination Cover Cap Injection Molding Machine
- ApplicationIndustrial Packaging
- ProcessInjection molding
100ml Cosmetic Flip-Cap Injection Molding Machine
- ApplicationCosmetic
- ProcessInjection molding
100ml Skincare Flip-Top Cap Injection Molding Machine
- ApplicationCosmetic
- ProcessInjection molding