1L-5L Wide Mouth HDPE Bottle Blow Molding Machine

Name: 1L-5L Wide Mouth HDPE Bottle Blow Molding Machine
Brand: AMAN

Overview

Wide-mouth bottles call for accurate neck calibration so the large opening stays round and threads seat properly, and this machine is set up to form 1L through 5L wide-mouth HDPE containers with the wall control servo-hydraulic drive provides. Automatic running takes the bottles from blowing through in-line deflashing without manual trimming of the wide neck flash, and single or double station options scale output on containers up to 5 L. HDPE multi-material running covers food, chemical and powder packaging that benefits from a wide opening.

Key features

Wide-mouth 1L to 5L HDPE bottles
Accurate neck calibration for round openings
Automatic deflashing of wide neck flash
Single or double station for scaling output

Application

Wide-mouth 1L-5L HDPE bottles and jars for food products, powders, chemicals and other contents poured or scooped from a large opening.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration. Request a quote →

Service and support

AMAN backs every machine with installation guidance and operator training. Our customers are in 100+ countries.

Tell us your container volume and monthly output target, and an AMAN engineer will confirm the right configuration.Send your drawing Ask on WhatsApp

Technical parameters

Parameters shown are for the single-station model; a double-station version is available; ask for its datasheet.

Parameter	Unit	AMB-5L (Single Station)
Max product capacity	L	5
Suitable material		HDPE
Screw diameter	mm	60
Extrusion output	kg/h	55
Oil pump motor power	kW	15
Platen size	mm	368 x 450
Machine floor space	mm	3200 x 2200 x 2500

One machine covers a range of sizes: you only change the mould to make a different product. The machine must be selected according to the LARGEST product you plan to make — running a small product on a large machine is possible, but you lose some efficiency and some material. Send us your smallest and your largest product (size and weight) and we will confirm whether one machine is enough.

We also make the blow mould for your bottle in our own workshop and try it out on a machine before it ships. Blow moulds take 25–35 days from approved drawings.

Each machine is configured to your container; the final specification is written into your quotation.

See each step of the extrusion blow molding process, and which machine range fits your container size.

Request a quote for this machine

Tell us your container or part, material and target output, and attach a drawing if you have one.

Name* Email*

Company Country

Phone / WhatsApp Machine of interest

Container & size Material

Target output Need mould?

Message

Attach drawings or photos (optional) Drag files here or browse Bottle photo, drawing, 3D file (STEP/IGES/STL), PDF, Word, Excel or ZIP · up to 10 files, 25 MB each

By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

WhatsApp +1 773-386-2484

Prefer direct? Email sales10@amanmachinery.com · WhatsApp +1 773-386-2484

FAQ

Wide-mouth 1L-5L HDPE bottles and jars for food products, powders, chemicals and other contents poured or scooped from a large opening. Send your part drawing or a sample and our engineers will confirm fit and output for your exact case.

HDPE is the typical material for this machine. Related grades can usually be qualified - tell us your resin and target container and we will confirm the processing setup.

Send us your container or part drawing, material, size and target output. Get an exact quote within 24–48 hours.

Lead time is confirmed in our quotation according to configuration.

2 years on mechanical parts and 1 year on electrical parts, for faults not caused by misuse.