sales10@amanmachinery.com
+1 773-386-2484Since 2007 · 100+ countriesEnglishEspañol
AMAN INDUSTRY CO., LTD logo +1 773-386-2484WhatsApp RFQ
Home/Moulds/Blow moulds/Jerry can blow mould
Corners, top handle and deflashing

Jerry can blow mould

Two places make or break a jerry can blow mould: the four corners and the handle on top. The corners have to carry enough wall to pass the drop test, and the handle is where the parison is pinched hardest. Both start in the tool: the corner radii and the handle pinch-off are cut into the steel before the can is ever blown.

  • ProcessExtrusion blow
  • Lead time25–35 days
  • CavitiesQuoted to your output
  • MaterialHDPE
Send your jerry can drawing Look at the tool

Tell us the volume, the can weight you are aiming for and the cans per hour. Only have the can? Photograph it from every side and tell us the volume.

WhatsApp +1 773-386-2484
The parison comes down and the mould closes on it; then cans off this mould, a few of them cut in half.
Blow moulds — lead time25–35 daysTooling for blown bottles, jerry cans and drums.
Trial parts ship with the toolMoulded on our own machine and packed in the same crate.
Get an exact quote within 24–48 hoursAn itemised price for your part.
Moulds cut in-houseOur own mould workshop in Jiangsu, China, running since 2007.
The tool itself

Jerry can moulds on the machine

Jerry can tooling running: the parison comes down, the mould closes on it and the can comes out.

One half of a jerry can blow mould with three cavities side by side
One half of a jerry can blow mould. Three cavities side by side.
From parison to conveyor. The parison drops, the mould closes and blows the can, the flash is taken off and the take-out arm sets it on the conveyor. Built for higher output; tell us your cans per hour.
A 10 L jerry can mould. The mould closes and opens, the can is lifted out, and a finished 10 L can is held up to the camera.
Out onto the conveyor. Small blue cans with a top handle, lifted out two at a time.
What comes off it

Cans off the line

Finished jerry cans straight off the mould.

Finished brown jerry cans off the mould, a few cut in half
Finished cans off the mould, a few of them cut in half.
Have a drawing or a sample of your own? Send it and get an exact quote within 24–48 hours.Send your drawing Ask on WhatsApp
Before you order

Seven questions about the tool itself

The seven that decide whether you order, answered for this tooling. Where a figure is on the drawing we print it; where it depends on your part we say which numbers we will ask you for.

1

Hot runner or cold runner?

There is no runner system on a blow mould. The parison comes off the die head, so instead of a runner choice we design the cooling and the pinch-off for the can you sell, and that is what the quotation describes.

2

Cycle time and output

Set by the can weight, the wall and the cooling on your machine. Tell us the cans per hour and how many cavities the machine carries and the figure is worked with you rather than quoted blind.

3

How the part is ejected

A can is released when the tool opens and taken out by the machine; the handle pinch and the flash are what we design. The deflashing arrangement is drawn before the steel is cut.

4

Tryout report and acceptance

The mould is fitted to a machine here and cans are blown before it ships, and those cans travel with it. Can weight, the capacity to the fill line, the drop test and the handle strength are the usual acceptance points.

5

Spare parts

The pinch-off inserts, the neck inserts and the deflashing cutters wear first, and they are cut from the same drawings. Say which spares to pack with the mould.

6

Warranty

Warranty terms are written into the quotation for that tool.

7

Will it fit your machine?

Send the make, model, platen size and daylight of your blow moulding machine, and the die head. The mould is designed to that machine and the fit is confirmed before cutting.

What we will ask you for: the can volume, the target can weight, the material, whether it has a handle, the cans per hour, and the machine.

How many cans an hour does the line have to make?

For a jerry can this decides whether the line runs single or double station, which changes the tool and the machine it needs. Tell us the output you are planning around.

Tell us your output target
Nearby

Related tooling

White 5 L detergent bottle with the handle blown in
Detergent bottle blow mould
Handle blown into the side, not the top →
Oil drum blow mould tryout
Oil drum blow mould
Lubricant and chemical drums, same workshop →
Double-station jerry can line: parison, blowing, deflashing and the take-out arm setting a brown can on the conveyor
Jerry can blow moulding machine
The machine this mould runs on →
Small blue HDPE jerry cans lifted onto the conveyor two at a time
Jerry can mould, product page
This jerry can mould, listed as a product →
Answers

Frequently asked questions

Start with the container: volume, handle, neck and the weight you sell at. Those decide the pinch-off, the venting and where the cooling has to go. Then the machine it runs on decides the mounting. Send the drawing or the can itself and our engineers propose the tool. North American buyers write jerry can blow mold for the same tool.
Auto-deflashing takes the flash off on the machine, so the can leaves without a second trimming step. It suits containers that carry a lot of flash, such as jerry cans with a handle on top.
Blow moulds are delivered in 25–35 days from approved drawings. An exact date is confirmed in the quotation.
Yes. Here the tool is built around the four corners, which carry the drop test, and the top handle, where the pinch is hardest. Bottles with the handle blown into the side are on our detergent bottle mould page.

More from the same workshop: oil and chemical bottle blow moulds · every blow mould we cut · oil drum blow moulds · detergent bottle moulds with a blown-in handle · the jerry can mould product page.

Machines for these moulds: the jerry can blow moulding machine this mould runs on.

Send us your jerry can drawing

Attach it straight to the enquiry form. A photo of the can from every side works too.

  • ✓A drawing, a 3D file, or clear photos of the container
  • ✓Volume, handle, neck size and the can weight you are aiming for
  • ✓Material, and whether you need auto-deflashing
  • ✓The machine it will run on, or the output you need
Attach drawings or photos (optional)

    By submitting this form you agree that we may use your details to reply to your inquiry, as described in our Privacy Policy.

    WhatsApp +1 773-386-2484

    Attachments go with the form. We come back with an exact quote within 24–48 hours. Prefer e-mail? sales10@amanmachinery.com