A full 150-500 ml cream jar mould set for Russia
A cosmetics buyer in Russia needed one jar family across five sizes, 150 to 500 ml, with the lids to match, and wanted the whole set to come off tooling designed together rather than assembled from separate orders.
- WhereRussia
- What was builtCream jar moulds and their lid moulds, 150 ml to 500 ml
- ProcessInjection
- Lead time40–60 days per tool, from approved drawings
What the customer was making
A range of cosmetic cream jars sold in five sizes, from 150 ml up to 500 ml, each with its own lid. The jars had to look like one family on the shelf: the same wall, the same finish and a lid that sits the same way on every size.
What was built
AMAN cut the jar tools and the matching lid tools in its own workshop, drawing each jar against the lid that closes on it. The cavities were polished to the finish the jars had to show, and the cooling was cut around each cavity so the finish stays even across a run.
Each tool was run on a machine here before it was packed, and the trial jars went with it, so the customer could see the parts the tooling actually produces, not a drawing of them.
What it would look like for your jar
Send the jar and the lid you sell, or the drawings, and say which sizes belong to the family. The tooling is cut to those parts, and the trial samples ship with it.
The tooling and the parts
Footage and photographs from this family of tools.
Five sizes, one neck
The jar drawing for each size in the set: the jar with its lid, and the jar on its own. All five jars take the same 92.99 mm lid.
Frequently asked questions
More from the same workshop: cosmetic jar moulds · cap and closure moulds.
Send us your jar drawing
Attach the drawing or photos of the jar and its lid straight to the enquiry form.
- ✓A drawing, a 3D file, or clear photos of the jar and the lid
- ✓The sizes that belong to the family, and the shared neck
- ✓Material and finish - glossy, frosted or textured
- ✓Cavities you want, or machine tonnage, or jars per hour