Cap Mould

You know,cap mould Improved hardness, high-temperature resistance, small deformation and no need for quenching, High surface hardness (greater than HV8500), wear-resistant. The normal use is not less than 2 million times.

Your Cap Mould Type

two color cap mold
Two Color Cap Mould
Flip Top Cap Mould
Flip Top Cap Mold
pull over cap mold
Pull Over Cap Mold
vaseline cover mold
Vaseline  Cover Mold
honey cap mould
Honey Cap Mould
eye dropper out cap mold Eye Dropper Inner Plug Mould
Eye Dropper Out Cap Mould
Eye Dropper Inner Plug Mould
child proof cover mould application
Child Proof Cover Mould

Why us

Aman Mould has been committed to the development and manufacture of bottle cap moulds.
Every year, a group of talents and huge R&D investments is introduced, especially in the aspects of precision injection molding, precision machining, fast molding speed, and short cycle.
As a result, Aman cap moulds are constantly innovating and improving in the industry and enjoy a high reputation. So far, we have delivered several sets of cap molds, which have been highly recognized by domestic and foreign customers.
In addition, Aman can also provide technical support and solutions for mold production lines for the plastics industry.

1. Project management flow chart

First, we received your request for quotation and design files and give you a detailed quotation. Usually, we will give you a quotation within 24 hours.

Once you approve the order, we will start the mold design, it needs about 3 days because, at the beginning of each project, our engineers need to sit together and have a meeting to find the best solution for the mold design.

After finishing the mold design, we will send you a 3D mold assembly drawing for you to check and confirm.

As soon as you confirmed the mold assembly drawing, we will purchase steel material and give you a schedule for your project. After that, we will start mold making. When the mold is finished, we will have the first mold trial and send you some free samples to check and test.

If you think the sample is good, then we will do the mass production as required. And if the samples are rejected, we will modify our molds.

When the production is finished, we will pack the goods and deliver them according to your requirement. Meanwhile, we will send you the packing pictures.

2. Quotation sheet

After receiving your RFQ, we will quote the price and send you a detailed quotation sheet. As you can see from this sheet, we will mention the mold cavities, steel material, injection system, mold size, mold weight, mold life, lead time as well as the price.

And about the price, what is important is that this price is valid within a week. Because you know, the material price and the exchange rate change day by day.

3. Weekly report

During the mold making, we will send you the weekly report each week to keep you noted about the mold progress.

4. Sample inspection report

Usually, when sending you the first trial samples, we will also send you an inspection report together for you to check the part size.

5. Note for mold changes or modifying

If there is something about the sample which are not ok, we will make a note for mold changes or modifications. In this note, we will point out the problem, the relative solution, and the time as well as the time needed.

6. The final one is a sheet about all the details for mold deign

When we do the mold design, we need to take all this information into our consideration to guarantee the best solution for the mold design.

Send Your Inquiry Today
Quick Quote