Auto Parts Mould
Surface Finish Process: | Polishing |
Mould Cavity: | Single or Multi |
Plastic Material: | PE |
Runner: | Cold Runner or Hot Runner |
Process Combination Type: | Single-Process Mode |
Plastic Material: | PP +Td20% |
Mould Cavity: | Multi Cavity |
Surface Finish Process: | Polishing |
Shaping Mode: | Injection Mould |
Auto Parts Mould
We are a supplier of high-quality auto parts molds, professional styling designers, and experienced skilled workers. You can order high-quality and long-life products at a competitive price in one stop. We will continue to provide continuous service and technical support. Finally, we will deliver on time.

- Specification
Surface Finish Process: | Polishing |
Mould Cavity: | Single or Multi |
Plastic Material: | PE |
Runner: | Cold Runner or Hot Runner |
Process Combination Type: | Single-Process Mode |
Plastic Material: | PP +Td20% |
Mould Cavity: | Multi Cavity |
Surface Finish Process: | Polishing |
Shaping Mode: | Injection Mould |
Customized various auto parts moulds.
The above technical parameters are subject to continual update, please rake the real product as the base.
Related Product
Aman Industry Takes “Faithful And Honest” As Root
Since 2007, our company, Aman Industry has had rich experience over the course of many years, making us the leading expert in the plastic packaging industry. Our seasoned, qualified experts have a diverse range of professional skills.
WHY US
- Full Certification
- Advanced Equipment
- Best Services
First, we received your request for quotation and design files and give you a detailed quotation. Usually, we will give you a quotation within 24 hours.
Once you approve the order, we will start the mold design, it needs about 3 days because, at the beginning of each project, our engineers need to sit together and have a meeting to find the best solution for the mold design.
After finishing the mold design, we will send you a 3D mold assembly drawing for you to check and confirm.
As soon as you confirmed the mold assembly drawing, we will purchase steel material and give you a schedule for your project. After that, we will start mold making. When the mold is finished, we will have the first mold trial and send you some free samples to check and test.
If you think the sample is good, then we will do the mass production as required. And if the samples are rejected, we will modify our molds.
When the production is finished, we will pack the goods and deliver them according to your requirement. Meanwhile, we will send you the packing pictures.
After receiving your RFQ, we will quote the price and send you a detailed quotation sheet. As you can see from this sheet, we will mention the mold cavities, steel material, injection system, mold size, mold weight, mold life, lead time as well as the price.
And about the price, what is important is that this price is valid within a week. Because you know, the material price and the exchange rate change day by day.
During the mold making, we will send you the weekly report each week to keep you noted about the mold progress.
Usually, when sending you the first trial samples, we will also send you an inspection report together for you to check the part size.
If there is something about the sample which are not ok, we will make a note for mold changes or modifications. In this note, we will point out the problem, the relative solution, and the time as well as the time needed.
When we do the mold design, we need to take all this information into our consideration to guarantee the best solution for the mold design.